Sedimclean Commercial Machine
(Submersible Design)
Tank Sediment cleaning with safety and water conservation
Product Image Gallery
Introduction
Principle
Application
Specification
Features
Limitation
Introduction
This machine is having a brush with handle and hose pipe connected to stationary submersible pump for sucking sediment from water tank. The sucked sediments are filtered through filter or discharged out.
Principle
This works on sediment water circulation and filtration. A brush at handles bottom end creates dusty localized cloud which will be absorbed by machine and through filter clean water may be returned to tank.
Application
Sediment deposition cleaning in water sump, fish pond, apartment water tanks, FRP cooling towers, Decorative water bodies…..etc.
Specification
Product specification
Pump Specifications
- Pump make :- Wilo
- Model :- PD 300EA
- Power Supply: – 230 V AC 50 Hz single phase
- Working depth :- 3 meters maximum
- Working Temperatures :- 35 Deg. Centigrades
- Pump Rating :- 300 Watts
- Pump protection :- IP 68
- Pump speed :- 2900 RPM
- Pump Flow Rate :- 3 to 7 Cu.M per hours as per head difference.
- Pump Head :- Maximum 7.5 M above water level of tank.
- Cable Length :- 3.2 meters approximate
- Pump MOC :- SS-304, PP, Rubber….etc.
System Specification
- Suction hose pipe :- 25 NB x 3 meter long
- Discharge hose pipe :- 32 NB x 4 meter long
- Overall size of unit :- 250 mm x 250 mm x 350 mm height
- Approximate submerse pump unit weight :- 10 Kg.
- Weight of hoses and Handle set:- 5 kg Approximate
- Base Frame :- SS-304, Poly propylene, Rubber
- Brush 02 nos. ( Straight and angular)
Features
- Machine works in submersed condition in tank.
- Water tank entry may be avoided for sediment removal.
- With less discharge of water more sediment removal.
- Manual movement design.
- Simple to operate and maintain.
- Water tank may be empty out easily with this product.
- Transportation easy and simple.
Limitation
- Machine can remove sediment size up to 10 mm diameter. Avoid use of machine where civil debris or other form of large sediments are present.
- Machine cannot remove any floating impurities.
- Machine works in normal atmospheric water temperatures only.
- Do not use machine as final sediment removing from drinking water.
- Do not use machine in any chemical, oil or in corrosive liquid application.
- Machine suitable for working depth of water less than 3 meters. (10 feet)